tips+tricks

How to Survive the All-Nighter

thrifty in transit (13).png

If you study architecture, all-nighters are basically inevitable. People define the all-nighter in different ways but essentially, you stay awake for an extended period of time without sleep so you can finish your work.

All-nighters usually happen more frequently in your earlier years of school because you haven't yet developed your routines and working habits. While I don't advise you to do all-nighters, I know that you will anyway, so here are my tips to help you do them more successfully!

 

How to Apply for Jobs and Internships in Architecture

27.png

For most people, the reason you study architecture is so you can earn your degree and pursue a career in the field. There is A TON of competition out there with school's architecture programs growing every year. Help yourself stand out from the crowd and get that job! 

There are 4 essential, physical things you will need to apply for jobs and internships in architecture.

1. Cover letter
2. Resume
3. Portfolio
4. Teaser portfolio (bonus)

Find out what they are and how to use them to your advantage!

 

Where to Buy Architecture Materials and Supplies

thrifty in transit (14).png

When I was starting out in architecture I was clueless about where to buy supplies for school. Furthermore, I like to shop around when I'm buying things so I can explore my options, comparing price and quality. Here I give you 6 suggestions for doing architecture on a budget!

 

6 Tips for Staying Focused in Studio

23.png

The architecture design studio is a magical place with tons of people and it holds with it an energy that's hard to explain. The studio is a great space to get inspiration; however, it can be a terrible place to actually get work done! There are so many noises and people around and just about every distraction you can imagine. That being said, there are actions you can take to get yourself in the "getting work done" mindset - here are 6 tips I use daily to get myself focused in studio!

 

1. Noise cancelling headphones
2. Organize your desk
3. Turn off phone wifi +/ data
4. Take a break
5. Stay hydrated + well-fed
6. Make prioritized to do list(s)


Sustainable Strategies - Louvers and Sun Shading Part 4

One of the most expensive building costs is the mechanical system used for heating and cooling the building. This applies to the cost of the system itself along with the cost of running and maintaining it. One way to lessen these costs is by using smart design and incorporating low tech louver systems to help regulate the amount of heat gain in the summer and take advantage of the sun in the winter. Here, in part 4 of the series you'll learn about different ways to achieve these results.

 

Sustainable Strategies - Louvers + Sun Shading Part 3

In Part 3 of the sustainable strategies - louvers and sun shading series, we talk about the 3 main types of louvers/sun shading devices. Here I also talk about many reasons why you would want to control the lighting in your building that you may not have considered. We look at existing examples of buildings that use these louver solutions to control the light in their buildings using low tech, well-thought-out design!

 

Sustainable Strategies - Louvers and Sun Shading Part 2

In this video we dig a little deeper into the sun diagram, identifying different effects that lighting can have on your building based on its orientation to the sun. Here we talk about the types of shading you should use based on the direction the sun is coming from.

 

Sustainable Strategies - Louvers + Sun Shading Part 1

Sun shading is a crucial aspect of architecture and design. This is the first video of a 4 part series teaching about the techniques for providing shading for your building!

As architects, we have a responsibility to design sustainable buildings. We need to design based on a building's location, orientation, climate, etc. Looking back to traditional, vernacular architecture, is one of the best ways to see low tech ways to accommodate for different conditions.

In this video we look at sun diagrams and talk about building orientation and sun direction. Watch to learn about shading your buildings!

 

How to Relieve Studio Stress

24.png

In the high demand culture we live in, it can be easy to overwhelm ourselves and become stressed. In my earlier years I found it very difficult to cope with these feelings and eventually decided I needed to find ways to manage my stress, quick! Watch below for my tips on relieving your studio stresses.

 
  1. Tea (or coffee) time

  2. Cook or bake (cause let's be honest, we all love to eat)

  3. Jam session - play an instrument

  4. Exercise

  5. Take a shower - you probably smell! ;)

How to Survive the Architecture Studio

25.png

There's no denying that studying architecture is hard. Sometimes it may feel impossible to get everything done in time. While getting work done is important, you should always make a point to take care of yourself first. Watch below for my tips to help you survive studio!

 
  1. Work in studio

  2. Good time management

  3. Eat well and often (and stay hydrated)

  4. Sleep every night

  5. Save and back up your work frequently

  6. Always use sharp knives when model making

  7. Take some YOU time every day

  8. Have fun!

Recommended Architecture Books

16.png

Ever wonder what types of books you'll be reading in architecture school? Some books will be less exciting like code or structures resource books (yuck) but others are truly inspiring! Look below to see the books I recommend having.

Books I recommend:

Steel Construction Manual* by Helmut C. Schulitz, Werner Sobek, and Karl J. Habermann

 

 

The Architect's Studio Companion* by Edward Allen and Joseph Iano

 

 

Lewis Tsurumaki Lewis: Opportunistic Architecture* by Paul Lewis, Marc Tsurumaki, David J. Lewis

 

 
 

Why Buildings Fall Down: How Structures Fail* by Matthys Levy and Mario Salvadori

 



 

Architecture: Form, Space, & Order* by Francis D. K. Ching

 

 

Building Construction Illustrated* by Francis D. K. Ching

 

 

Building Codes Illustrated* by Francis D. K. Ching

 

 

Architectural Graphics* by Francis D. K. Ching

 

 

The Architecture of Happiness* by Alain de Botton

 

 

Form and Forces: Designing Efficient, Expressive Structures* by Edward Allen, Wactaw Zalewski, and Boston Structures Group

 

 

Structures* by Daniel L. Schodek and Martin Bechtold

 

Architecture Studio Supplies

17.png

I bet you're wondering what supplies you'll need for your architecture studio. Schools don't always tell you exactly what supplies you need (often until the day you need them) and you'll find yourself scrambling at the last minute to finish your assignments. Watch the video below to see the essential supplies you'll need get by and thrive in studio!



 

These are some of the supplies I use:

Sketchbook*

I like to use a smaller sketchbook that I can carry around with me. Usually I'll use a 5x8 sketchbook with gridded pages.

 

Architectural Tri-Scale*

For architectural scales, I prefer to have a metal scale over plastic since they won't damage as easily. I also suggest getting both a full size scale and a smaller travel size scale that you can carry around with you.

 

Parallel Ruler*

A parallel ruler is a straight edge that slides vertically on your drafting table to help you draw straight lines while drafting.

 

Trace Paper*

You'll want a couple of different sizes of rolls of trace for when your drafting and sketching.

 

Olfa Knife*

An Olfa knife is a more heavy duty knife used to cut thicker materials like chipboard and plexy while making models.

 

Replacement Olfa Knife Blades*

One of the most dangerous things people do when making models is use dull blades while cutting materials. Also make sure to have lots of replacement blades while building models.

 

X-acto Knife*

An X-acto knife is a light duty knife used to cut thinner materials like paper but like with olfa knives, make sure to always use a sharp blade.

 

Straight Edge Ruler*

In addition to being a ruler, this straight edge has a raised edge to protect your fingers when cutting with a blade along the ruler. It also has a non slip grip on the bottom so it won't slide around.

 

Push Pins: Clear* and Aluminum*

You'll always need tons of push pins. These are what you'll use to pin up drawings for presentations as well as inspirational images at your desk. You may even want to pin up some of my guides at your desk!

 

Hot Glue Gun*

Hot glue guns are what you'll be using on study models or in places on final models that you wont see.

 

Hot Glue Refills*

It's always a good idea to have a backup of glue refills for your guns.

 

Easy Cutter*

Easy cutters a perfect for cutting things like balsa wood and wooden dowels. There are angle markers to help make cuts at different angles.

 

Pilot Razor Point II Pen*

These are my favorite pens because they dry quickly and don't require any pressure to write. I use these for sketching and drafting.

 

Prismacolor Markers*

Prismacolor markers are my favorite markers to do hand renderings with. These markers are great because they're double sided with a broad side for when you want broad strokes and a point side for when you need to be more accurate.

 

Toolbox*

This is my favorite toolbox because it's compact, lightweight, and has lots of compartments to organize all my tools.

 

 

6-in-1 Screwdriver*

It's always a good idea to have a screwdriver with different heads for things like assembling your parallel ruler.

 

Pencils*

Especially when first starting out, it's useful to get a set of pencils with varying hardnesses for drafting by hand. This way you can experiment with different pencils and see which work best for you. Helpful tip: HB = #2 = medium hardness.

 

Lead Holder*

Lead holders are basically mechanical pencils that have refillable lead. I recommend having at least 3 different colored lead holders with different types of lead so you can easily switch between them while drafting.

 

Lead Pointer*

A lead pointer is what you'll use to sharpen your lead. Use the two smaller holes on either side of the white pad to control the length of the tip. Place the tip in the larger hole and spin the top around until sharpened, then dip the tip into the white felt pad to wipe off the dust.

 

Kneaded Eraser*

I like to use kneaded erasers to control lineweights and when working with charcoal. You usually want to dab on a surface to pickup the graphite or charcoal so as to not smudge the work. To clean the eraser you stretch and knead it and can rip off smaller pieces when working with smaller areas then morph it all back together again.

 

Gum Eraser*

Gum erasers work well for erasing colored pencils and graphite without leaving smudges.

 

Plastic Eraser*

Plastic erasers are used for general purposes. These are my favorite erasers because they'll erase just about everything and don't smudge.

 

Eraser Pen*

Eraser pens/sticks are useful when erasing small areas like when lines are close together.

 

Eraser Pen Refills*

It's always a good idea to have eraser refills.

 

Power Eraser*

For areas where you don't have much wiggle room for erasing it can be really useful to have an electric eraser to do the erasing work for you without the fear of ruining the rest of your drawing with erasing strokes.

 

Power Eraser Refills*

Electric erasers are small and you go through them pretty quick so I suggest having backups on hand.

 

Eraser Shield*

Eraser shield are thin metal sheets with different sized and shaped holes that's placed over your drawing to protect the areas around what you're erasing.

 

Cutting Mat* (one large one small can be helpful!)

Cutting mats double as both a working surface for assembling models and a safe cutting surface that won't damage your desk. Look for "self healing" mats that will mend and hide the cut marks on the mat. I suggest having a large and a small mat.

 

All-Purpose Glue*

All purpose glue is a great basic glue for building models, just make sure whatever glue you use that it dries clear.

 

Adjustable Triangle*

An adjustable triangle is great because it can be adjusted to any angle.

 

Drafting Triangles*

In addition to an adjustable triangle, I'd suggest having fixed triangles too so you can quickly switch between them and work more quickly. I'd recommend 30-60-90 and 45-45-90 angled triangles.

 

Drafting Dots*

Drafting dots are round shaped pieces of light adhesive tape that wont tear your drawings.

 

Drafting Tape*

Drafting tape is an alternative to using drafting dots. It's a light adhesive tape that wont tear your drawings.

 

Drafting Brush*

A drafting brush is a soft bristled brush that you can use to brush debris off your drawings without smudging them.

 

Vyco Drawing Mat*

A Vyco drawing mat covers your desk to provide a smooth surface for drafting or sketching.

 

Desk Lamp*

An architectural desk lamp can be mounted to any table without taking up any desk space.

 

Portable Drafting Board*

A portable drafting board is great if you want to be able to draft anywhere.